Bath Accessories
Clearco Products Co Inc High Temperature Silicone Bath Fluid, 1 Gallon
DPDM-400 HIGH TEMPERATURE BATH FLUID is a clear, colorless and odorless Diphenyl-Dimethylsiloxane (CAS# 68083-14-7) with a viscosity of 400cSt. It remains stable at 250°C (open system) for 1,500 to 2,000 hours without gelling or breaking down. In closed system baths*, DPDM-400 HIGH TEMPERATURE BATH FLUID remains stable at 300°C.
Ace Glass, Inc. 1qt high temperature silicone based bath oil
An extremely stable, medium viscosity, silicone oil. Temperature range: High Temp. maximum 230 degree C. Oil shows no discoloration after 40 hours at maximum temperature.
Electron Microscopy Sciences Tissue Grip™ Water Bath Adhesive 500 ML
Liquid water bath adhesive used in H & E staining, special stains, and immunoperoxidase procedures.
Julabo USA Inc 5L Thermal EG bath fluid +30…+80 °C; dilute 1:1 with water
Bath Accessories, Julabo, 5L Thermal EG is clear, concentrated ethylene glycol with added stabilizer. Dilution of Thermal EG with water to a 1:1 ratio yields a a working temperature range of -30…+80 °C rated for use in open bath JULABO units or from -30…+90 °C in single stage PRESTO units (A30, A40, W40, A45, A45t, W50, W50t, W55). CAUTION: not suitable for use with exposure to aluminum components! Contact JULABO directly for information on ethylene glycol formulated for use with aluminum.
Chemglass Life Sciences 0.75L Lab Armor Beads
0.75L Lab Armor Beads. These dry metallic beads replace water in water baths, aluminum blocks in dry baths, ice in ice buckets, and give old equipment a cool, shiny, state-of-the-art look while maintaining temperatures of -20C to 8C for 4 or more hours. Open sources of water in the lab can put the lab at risk if incubating and spreading biological or chemical contamination between samples, equipment and people. Unknown biological and chemical contamination in water can readily enter your incubating samples resulting in distorted data and non-reproducible results. Lab Armor bead technology will save you countless hours of reworking ruined experiments and eliminate cleaning. Lab Armor Beads extend the life of your bath by eliminating corrosion and reducing burn-out risk. For best performance, use product at an operating temperature of -80 to 180C. Product may be used up to 300C without loss in thermal performance, but product fluidity may be reduced.
Chemglass Life Sciences 20L Lab Armor Beads, Shipped in (5) 4L Containers
These dry metallic beads replace water in water baths, aluminum blocks in dry baths, ice in ice buckets, and give old equipment a cool, shiny, state-of-the-art look while maintaining temperatures of -20 ° C to 8 ° C for 4 or more hours. Open sources of water in the lab can put the lab at risk if incubating and spreading biological or chemical contamination between samples, equipment and people. Unknown biological and chemical contamination in water can readily enter your incubating samples resulting in distorted data and non-reproducible results. Lab Armor bead technology will save you countless hours of reworking ruined experiments and eliminate cleaning. Lab Armor Beads extend the life of your bath by eliminating corrosion and reducing burn-out risk. For best performance, use product at an operating temperature of -80 to 180 ° C. However, product may be used up to 300 ° C without loss in thermal performance, but product fluidity may be reduced. Please contact technical services for s
Enterprise Technology Solutions Sitz Bath w/ Attachment Instr
Sitz Bath w/ Attachment Instructions 2 qt. Mauve 10/cs
Electron Microscopy Sciences CoverWell™ Water Bath Holder for Incubation, depth
Use with CoverWell Incubation Chambers.
Electron Microscopy Sciences CoverWell™ Water Bath Holder for Incubation, depth
Use with CoverWell Incubation Chambers.
MSC E.R. Wagner Swivel Caster, 3 in, Polyolefin, Threaded Stem
This swivel caster is designed for industrial and commercial applications, featuring a stem mount for secure attachment. It includes a polyolefin wheel with a 3 inch diameter and 1-1/4 inch width, offering a 210 lb capacity with a plain bearing. The caster is equipped with a 7/16-14 x 1-1/2 inch threaded stem for easy installation.
- Threaded stem mount for secure installation.
- Wheel made from durable polyolefin material.
- Provides a 3 inch wheel diameter.
- Features a swivel design for maneuverability.
- Equipped with a plain bearing.
- Constructed with hardened-heat treated components.
- Finished with zinc chromate for corrosion resistance.
- Suitable for industrial and commercial applications.
- Manufactured in the United States.